• Diesel Generators
  • 1 to 30 kW
  • 31 to 60 kW
  • 61 to 99 kW
  • 100 to 150 kW
  • 151 to 200 kW
  • 201 to 300 kW
  • 301 to 500 kW
  • 501 to 999 kW
  • 1000 kW and Up
  • Rental Grade Generators
  • Light Tower Generators
  • For Export Only
• Mobile Generators
• Marine Generators
  • 1 to 10 kW
  • 11 to 20 kW
  • 21 to 50 kW
  • 51 kW and Up
• Transfer Switches
  • 1 to 100 Amps
  • 100 to 200 Amps
  • 200 to 400 Amps
  • 400 to 600 Amps
  • 600 to 1000 Amps
  • 1000 to 1600 Amps
  • 1600 Amps and Up
• Generator Accessories
  • Algae-X Fue
  • Base Tanks - Stocked
  • Batteries
  • Battery Chargers
  • Control Panels
  • Enclosures
  • Fuel Tanks
  • Industrial Soundproofing
  • Light Towers
  • Load Banks
  • Marathon Generator
  • PTO Generators
  • Racor Fuel Filters
  • Remote Tanks
  • Trailers
  • Transfer Switches
  • Transformers
  • Voltage Regulators

800 kW Cummins Powered Generator Power Module

• New
• 1 Year / 1,000 Hour Limited Warranty (Whichever comes first)
• 60 Hertz
• Battery Charging Alternator
• Digital Control Panel
• Electric Start
• Factory Loadbank Tested
• Mainline Circuit Breaker
• Rental Grade Units
• Weatherproof
• Dimensions (L x W x H - height does not include muffler): standard 40' container
  
• Control Panel: Deep Sea Model 5210
• Stamford Newage Generator End
• GeneratorType: Diesel
• Governor: Electronic Governor
• 3 Phase

800 KW/ 60Hz
800 KVA/ 50Hz
480 volt/3Phase (standard)
Cummins QSK23G7 Engine
Stamford Newage HCI634G Alternator
Battery Charging Alternator
Mainline Circuit Breaker
Side Mounted Control Panel: DSE5210
Silencer and Flex connector
40' ISO Sound Attenuated Enclosure
Triple Axle D.O.T. Approved Chassis
*Batteries, Battery Rack, and Cables Not Included
Option: Deepsea 5510 Paralelling Control Panel w/ Motorized Breaker - for an additional fee

Power Module Package
- New high cube container (one time shipment from China)
- Personnel entrance door with cam lock latch system
- Dual louvered air intake grills
- Sound attenuating interior insulation (silver) with stainless trim
- Mounted and plumbed 1,200 gallon double wall fuel tank
- Mounted mufflers with installed custom heat blankets
- Internal updraft radiator discharge scoop (radiator discharge air goes out the top for quiet operation)
- NEMA 1 cabinet with mounted mainline circuit breaker
- Connection lugs
- Exterior door for wire entrance into the foot of the breaker box
- Imron paint
- Steel diamond plate floor, painted grey                  
- 12 volt DC Interior lighting      

Includes 1200 Gal Base Tank
- Inner tank fabricated with 10 gauge steel
- Outer tank fabricated with 7 gauge steel, including top and bottom
- 4  2" NPT fittings, including two 1" NPT engine supply and return dip tubes, fuel fill, normal vent, direct reading mechanical fuel gauge, one additional fitting for standard low fuel switch
- Outer containment area is permanently vented through manufacturers
- One NPT basin drain/fuel in basin switch is provided as standard equipment
- All tanks are painted satin black unless specified
- Empty Weight: 5500 Lbs
- Sub-base Dimension: 96" x 54" x 72"

810 kW Cummins                    
-High quality and reliable
-Compact Design
-Easy start and maintenance
-Subject to a comprehensive test program which includes full and overload testing and proving of all control and safety shut down functions.

Deep Sea Control Panel 5210
Model 5210 is an Automatic Engine Control Module.  The module is used to automatically start and stop the engine, indicating the operational status and fault conditions, automatically shutting down the engine and indicating an engine failure by means of an LCD display and an appropriate flashing LED on the front panel.  Selected timers and alarms can be altered by the customer from the front panel.  Alterations to the system are made using the 810 interface and a PC.  This interface also provides real-time diagnostic facilities.

It is possible to monitor operation of the system either locally or remotely.  (Optional: remote communications output versions only.)

5210 Easy Pushbutton Control
Operation of the module is via pushbutton controls (with security locking facility) mounted on the front panel with STOP/RESET, AUTO, MANUAL, and START buttons.  The first three buttons feature LED ‘selected’ indications.  Further buttons provide LCD DISPLAY SCROLL and EVENT LOG VIEW functions.

5210 Microprocessor Control
The module features 16 bit microprocessor control and a comprehensive list of timers and pre-configured sequences.  This allows demanding specifications to be achieved.  Configurable expansion facilities are also provided.

5210 Metering
The 5210 module provides metering via the LCD display with the following instrumentation displays, accessed via the LCD DISPLAY SCROLL push buttons:
- Generator Volts L1-N, L2-N, L3-N
- Generator Volts L1-L2, L2-L3, L3-L1
- Generator Amps L1, L2, L3
- Generator Frequency Hz
- Engine Speed RPM
- Engine Oil Pressure
- Fuel Level %
- Engine Temperature
- Plant Battery Volts
- Engine Hours Run
- Generator kVA
- Generator kW

Specifications may vary. Confirm full specs prior to ordering.

FOB Miami

Lease rates for $254,999.00

Extend the warranty to 5 years for $23,460