Americas Generators - Leading Industrial Generator Supplier Americas Generators - Generator Header
ph: 305-592-6800
toll-free: (800)434-0003
Fax: 305-592-5900

1250 kW Cummins Powered Generator Set Power Module

SKU 558025
Model OC1250 PM

1250 KW/ 60Hz
1250 KVA/ 50Hz
480 volt/3Phase
Cummins KTA50G3 Engine
Stamford Newage PI734B Alternator
Battery Charging Alternator
Mainline Circuit Breaker
Side Mounted Control Panel: DSE5210
Silencer and Flex connector
Triple Axle D.O.T. Approved Chassis
*Batteries, Battery Rack, and Cables Not Included
Option: Deepsea 5510 Paralelling Control Panel w/ Motorized Breaker - for an additional fee

ENCLOSURE
- High cube container (One time used / refurbished like New)
- Personnel entrance door with cam lock latch system
- Dual louvered air intake grills
- Sound attenuating interior insulation (silver) with stainless trim
- Mounted and plumbed 1,200 gallon double wall fuel tank
- Mounted mufflers with installed custom heat blankets
- Internal updraft radiator discharge scoop (radiator discharge air goes out the top for quiet operation)
- NEMA 1 cabinet with mounted mainline circuit breaker
- Connection lugs
- Exterior door for wire entrance into the foot of the breaker box
- Imron paint
- Steel diamond plate floor, painted grey                  
- 12 volt DC Interior lighting    

   Trailer
-Length: 96"
-Tandem: 54"
-Max Rear Hit: 48"
-GVWR: 65,000
-Weight: 6500+/-2%

Includes 1200 Gal Base Tank
- Inner tank fabricated with 10 gauge steel
- Outer tank fabricated with 7 gauge steel, including top and bottom
- 4  2" NPT fittings, including two 1" NPT engine supply and return dip tubes, fuel fill, normal vent, direct reading mechanical fuel gauge, one additional fitting for standard low fuel switch
- Outer containment area is permanently vented through manufacturers
- One NPT basin drain/fuel in basin switch is provided as standard equipment
- All tanks are painted satin black unless specified
- Empty Weight: 5500 Lbs
- Sub-base Dimension: 96" x 54" x 72"

Deep Sea Control Panel 5210
Model 5210 is an Automatic Engine Control Module.  The module is used to automatically start and stop the engine, indicating the operational status and fault conditions, automatically shutting down the engine and indicating an engine failure by means of an LCD display and an appropriate flashing LED on the front panel.  Selected timers and alarms can be altered by the customer from the front panel.  Alterations to the system are made using the 810 interface and a PC.  This interface also provides real-time diagnostic facilities.

It is possible to monitor operation of the system either locally or remotely.  (Optional: remote communications output versions only.)

5210 Easy Pushbutton Control
Operation of the module is via pushbutton controls (with security locking facility) mounted on the front panel with STOP/RESET, AUTO, MANUAL, and START buttons.  The first three buttons feature LED ‘selected’ indications.  Further buttons provide LCD DISPLAY SCROLL and EVENT LOG VIEW functions.

5210 Microprocessor Control
The module features 16 bit microprocessor control and a comprehensive list of timers and pre-configured sequences.  This allows demanding specifications to be achieved.  Configurable expansion facilities are also provided.

5210 Metering
The 5210 module provides metering via the LCD display with the following instrumentation displays, accessed via the LCD DISPLAY SCROLL push buttons:
- Generator Volts L1-N, L2-N, L3-N
- Generator Volts L1-L2, L2-L3, L3-L1
- Generator Amps L1, L2, L3
- Generator Frequency Hz
- Engine Speed RPM
- Engine Oil Pressure
- Fuel Level %
- Engine Temperature
- Plant Battery Volts
- Engine Hours Run
- Generator kVA
- Generator kW

Specifications may vary. Confirm full specs prior to ordering.


Accessories for Generators
Algae-X Fuel Conditioner/Filters
Base Tanks - Custom
Base Tanks - Stocked
Batteries
Battery Chargers
Control Panels
Enclosures
Fuel Tanks
Light Towers
Load Banks
Marathon Generator Ends
Racor Fuel Filters
Remote Tanks
Trailers
Transfer Switches
Transformers
Voltage Regulators
Wire Products
MSRP $299,999.00

Click Here for Discount Price

Lease payments as low as $5,110 /month


Low lease rates available through GE Capital Finance
800-424-0007 or 305-592-6800

Se Habla Español



1250 kW Cummins Powered Generator Set Power Module 1250 kW Cummins Powered Generator Set Power Module
Download More Information
KTA50G3.pdf
File Size: 151.11 kb
OC1250 Drawing.pdf
File Size: 143.401 kb
OC1250.pdf
File Size: 1258.329 kb
PM734B.pdf
File Size: 275.773 kb

Get Adobe Acrobat Reader


In Stock

Available for Immediate Delivery
FOB Miami


Lease rates for $299,999.00

36 Months 48 Months 60 Months
$8,610 /month $6,410 /month $5,110 /month



Extend the warranty to 5 years for $27,600